-
Dispersed MnO2 nanoparticles/sugarcane bagasse-derived carbon composite as an anode material for lithium-ion batteries
- Back
Document Title
Dispersed MnO2 nanoparticles/sugarcane bagasse-derived carbon composite as an anode material for lithium-ion batteries
Author
Pongpanyanate K. Roddecha S. Piyanirund C. Phraewphiphat T. Hasin P.
Affiliations
Department of Chemical Engineering Faculty of Engineering Kasetsart University Thailand; Department of Chemistry Center of Excellence for Innovation in Chemistry (PERCH-CIC) Ministry of Higher Education Science Research and Innovation Faculty of Science Kasetsart University Thailand; Kasetsart University Research and Development Institute Kasetsart University Thailand; National Energy Technology Center (ENTEC) 114 Thailand Science Park Phaholyothin Road Klong 1 Klongluang Pathumthani 12120 Thailand
Type
Article
Source Title
RSC Advances
ISSN
20462069
Year
2024
Volume
14
Issue
4
Page
2354-2368
Open Access
All Open Access Gold Green
Publisher
Royal Society of Chemistry
DOI
10.1039/d3ra04008a
Abstract
Bagasse-derived carbon electrodes were developed by doping with nitrogen functional groups and compositing with high-capacity MnO2 nanoparticles (MnO2/NBGC). The bagasse-derived biochar was N-doped by refluxing in urea followed by the deposition of MnO2 nanoparticles onto its porous surface via the hydrothermal reduction of KMnO4. Different initial KMnO4 loading concentrations (i.e. 5 10 40 and 100 mM) were applied to optimize the composite morphology and the corresponding electrochemical performance. Material characterization confirmed that the carbon composite has a mesoporous structure along with the dispersion of MnO2 nano-particles on the N-containing carbon surface. It was found that the 5-MnO2/NBGC sample exhibited the highest electrochemical performance with a reversible capacity of 760 mA h g?1 at a current density of 186 mA g?1. It delivered reversible capacities of 488 and 390 mA h g?1 in cycle tests at 372 and 744 mA g?1 respectively for 150 cycles and presented good reversibility with nearly 100% coulombic efficiency. In addition it could exert high capacities up to 388 and 301 mA h g?1 even under high current densities of 1860 and 3720 mA g?1 respectively. Moreover most of the prepared composite products showed high rate capability with great reversibility up to more than 90% after testing at a high current density of 3720 mA g?1. The great electrochemical performance of the MnO2/NBGC nanocomposite electrode can be attributed to the synergistic impact of the hierarchical architecture of the MnO2 nanocrystals deposited on porous carbon and the capacitive effect of the N-containing defects within the carbon material. The nanostructure of the MnO2 particles deposited on porous carbon limits its large volume change during cycling and promotes good adhesion of MnO2 nanoparticles with the substrate. Meanwhile the capacitive effect of the exposed N-functional groups enables fast ionic conduction and reduces interfacial resistance at the electrode interface. ? 2024 The Royal Society of Chemistry.
Industrial Classification
Knowledge Taxonomy Level 1
Knowledge Taxonomy Level 2
Knowledge Taxonomy Level 3
License
CC BY-NC
Rights
Authors
Publication Source
Scopus